Double Railing Top T & G Gate Installation

Please enter your gate installation details,

Alternatives to ordering online.

How To Measure Correctly

  • All gates are made to measure & site assessor will take final accurate measurements for you but you must choose
  • Maximum height of gate required
  • Maximum width of gate required
  • If required fence length of closed board section to left side of gate (Round up to nearest metre for each section)
  • If required fence length of closed board section to right side of gate (Round up to nearest metre for each section)
  • Old fence & gate will be taken down free of charge. For removing from site, select ‘old fence removal service’ & enter length of fence & gate section for removal. Only timber can be removed from site. No metal, concrete or spoil due to mixed waste rules.

What Follows Now

  • Get an instant installed price.
  • Choose a date & time for assessors visit. (To confirm it’s position, opening direction, the finer aspects of your order & answer any questions)
  • Enter your details. Click Confirm & Pay your deposit.(for peace of mind all monies paid are fully refundable up to & including the day of assessors site visit).

Fence installations available inside selected postcode areas only.

Product Description

Kudos manufactured double Railing Top T & G gate. c/w suitable hinges, ring latch & 2 drop bolts. Constructed using pressure treated redwood timber with 95mm x 45mm framing and 28mm x 115mm cross brace which is finished with a solid 16mm finish v joint tongue and groove board. These gates are constructed with mortice and tenon joints. Gates are finished with a decorative heel & 12mm black railings for an elegant entrance to your property. Supported by suitably sized 100 – 200mm posts or wall rails.

T & G Gate With Railing Top
Front View
T & G Gate With Railing Top
Rear View
Closed Board Gate Side Panel
Optional Closed Board Side Wing