Double Opening Flat Top T & G Gate Installation

Please enter your gate installation details,

Alternatives to ordering online.

How To Measure Correctly

  • All gates are made to measure & site assessor will take final accurate measurements for you but you must choose 
  • Maximum height of gate required
  • Maximum width of gate required
  • If required fence length of closed board section to left side of gate (Round up to nearest metre for each section)
  • If required fence length of closed board section to right side of gate (Round up to nearest metre for each section)
  • Old fence & gate will be taken down free of charge. For removing from site, select ‘old fence removal service’ & enter length of fence & gate section for removal. Only timber can be removed from site. No metal, concrete or spoil due to mixed waste rules.

What Follows Now

  • Get an instant installed price.
  • Choose a date & time for assessors visit. (To confirm it’s position, opening direction, the finer aspects of your order & answer any questions)
  • Enter your details. Click Confirm & Pay your deposit.(for peace of mind all monies paid are fully refundable up to & including the day of assessors site visit).

Fence installations available inside selected postcode areas only.

Product Description

Kudos manufactured double flat top tongue & groove gate. c/w suitable hinges, ring latch & 2 drop bolts. Constructed using planed 70mm x 38mm thick redwood timbers. Gate frames are fastened using steel structural fixings providing you with a strong gate. Total planed finished with 120mm wide x 12mm thick TGV cladding & a capped finish to the top. Supported by suitably sized 100mm to 200mm posts or wall rails. Optional side wings fitted using standard closed board fencing. All Kudos timber products are pressure treated.

Double Driveway Gates In Tongue & Groove Timber
Timber T & G Double Entrance Gates
Rear Face
Wooden Tongue & Groove Gates
Strong Frame
Closed Board Gate Infill Panel
Optional Closed Board Side Wing